Xylem 600026, Руководство по эксплуатации

Страница: 11 / 60

Installation Turb PLUS 2000
100193 Rev 0 ba77254e01 11/2020 11
Installation
DANGER
The Turb PLUS 2000 must be mounted and installed in a suitable location,
plumbed to the sample water source (section 3.34), and hard-wired to
electrical power (section 3.4). Installation MUST be performed by qualified
technicians, including licensed electricians, following all instructions,
complying with all local, state, federal and other governmental
requirements, and with all building and construction codes and
standards.
If you have any questions or are uncertain about proper site location, installation or connection of
the Turb PLUS 2000, please contact Xylem Analytics Germany.
DANGER
Failure to follow all installation instructions and requirements risks
possible death, personal injury, property damage, and failure of the
instrument to perform as intended.
Installation
MUST be performed by qualified technicians, including licensed electricians, following
all instructions, complying with all local, state, federal and other governmental requirements, and
with all building and construction codes and standards.
Turb PLUS 2000 is electrically powered.
ALWAYS
take proper precautions to recognize,
evaluate, and control electrical hazards during installation, programming, use and
service/maintenance.
Use
ONLY with water free of corrosive chemicals or other hazardous substances.
ALWAYS leak check plumbing connections following installation and on a regular basis.
Turb PLUS 2000
MUST
be installed in an area isolated from vibration, and not susceptible to
freezing or temperature extremes. Mount on any suitable vertical and flat surface that can
support the product’s weight.
Keep installation and work area clean, well-lighted, free of clutter and distractions, and accessible
only by authorized personnel and workers.
Turb PLUS 2000 must be located in an accessible and well-lighted area for use, servicing, repair
or replacement by authorized personnel.