40
When the starting switch is in the “ ON”
state, the front windshield wiper and
scrubber can be operated.
1 OFF: initial position
From the initial position OFF, pull the
wiper switch upward, and they are as
follows:
2 INT: Wiper intermittent gear
3 LO: wiper low gear
4 Hi: wiper high gear
The speed of the intermittent wiper can be adjusted by moving the wiper switch
upwards from the initial position OFF to the position INT.
Pull the wiper switch upward from the initial position OFF to the position LO, and
the wiper will operate at low speed.
From the initial position OFF, pull the wiper switch upward to the HI position and
the wiper will run at high speed.
Put the front wiper gear switch in the OFF position, and the front wiper brush will
automatically return to the position in the low speed wiper mode; Put the key in
the ON state.
If the front wiper brush is not ON the return point, it will automatically return to
the position with low speed wiper.
Front windshield wiper operation
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
