45
Turn the light switch end knob OFF to
position lamplet (including background light
and license plate light) on. At the same time,
the indicator light of the lamplet in the
combined instrument is lit.
The starting switch is in the state of “OFF”.
When the lamplet is turned on and the left
front door is opened, the alarm prompt
function is activated if the lamplet is not
turned OFF. At this point, BCM will drive the
built-in buzzer to sound alarm in 1Hz cycle
until the left front door is closed or the small
When the lamplet is turned on and the left
front door is opened, the alarm prompt
function is activated if the lamplet is not
turned OFF.
At this point, BCM will drive the built-in
buzzer to sound alarm in 1Hz cycle until the
left front door is closed or the small light is
off or ACC and IGN are turned on. When the
starting switch is in the “ON” state, turn the
light switch end knob OFF to position
The starting switch is in the state of “ON”,
turn ON the passing beam light and push
the light switch downward, and the driving
beam is ON
At the same time, the passing beam light
and lamplet are lit. The driving beam
indicator in the combined instrument
lights up. When the driving beam is on,
the passing beam will be off. Switch to the
passing beam light when you pull the light
switch up to the initial position.
Lamplet
Passing beam light
Driving beam light
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
