32
Replace the battery of the remote
control key
• Take out the mechanical key
• Use a straight screwdriver to pry open
the back cover of the key carefully. Be
careful not to drop the circuit board
inside.
• Use a straight screwdriver to carefully
push the battery out, not touching the
circuit board.
• Load the new battery, pay attention
to the position of the positive and
negative poles (“ + “pole facing up).
• Close the key back cover and insert
the mechanical key.
Remote control key to lock and
unlock the door
If all doors are closed, all doors are
locked, left and right turn signal flashes
once, the vehicle enters the fortified
state.
If any door is not closed well, the turn
signal flashes 4 times with a cycle of
840ms, 50% duty ratio, and the horn
sounds once to prompt the door to
be closed, and the door lock does not
move.
ATTENTION
• The specifications of the new battery
must be the same as the original
battery.
• Battery specification: CR2032.
• Used batteries must be disposed of
in accordance with environmental
requirements.
• Please keep the spare key in a safe
place, not in the car.
• The remote key is equipped with
a sophisticated circuit board and
must be protected from shock,
water, moisture, solvents, waxes
and scrubbing agents, and high
temperatures.
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
