20
Slow charging mode
Before charging, ensure that the starting
switch is in the state of “OFF”. Step down
the parking brake pedal, and the power
OFF switch is in the state of pulling and
switching on.
Pull the slow charging port opening handle
located at the lower protective plate of
pillar A at the lower left of the instrument
panel from the car, and open the slow
charging port cover.
Pull the lock tongue of the charging port
dust cover, open the charging port dust
cover, and connect the charging gun to
carry out charging operation.
Insert the European standard charging
plug into the standard socket. The power
indicator is always on. Insert the AC
charging gun into the vehicle interface -
AC vehicle charging socket
ATTENTION
• In order to facilitate the operation
and safe use, it is recommended that
the height of the power supply socket
should not be more than 30cm from the
ground, and the charging box should
be fixed to avoid the force on the plug,
otherwise it is easy to cause the product
to fall and damage.
• This product is an electronic product,
should not be placed in direct sunlight
or wet place to use.
ATTENTION
• After the plug is completed, if the
connection is normal, the online control
box will start automatically and the
on-board charger will start charging the
vehicle battery.
• After the battery is fully charged, the
charging indicator light of the on-line
control box is always on.
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
