VIII
High voltage system
There are two types of voltage in the vehicle’s high voltage system, AC and DC, which
are very dangerous and can cause serious injuries such as burns, electric shock and even
death. In case of emergency, if conditions permit, you can press the maintenance
power-off switch under the console.
Maintenance power-off switch
High voltage warning label
Surface of power control unit, surface
of driving motor, surface of electric air
conditioner compressor, surface of charging
machine, surface of power battery, surface
of high voltage wiring harness, charging port
cover.
DANGER
• Do not touch high-voltage cables and their
connectors.
• The parts with the orange label are all
parts of the high voltage system. The
warning label of the high voltage system
is affixed on these parts. Please comply
with the content of the label.
• Any parts in the system, such as slow
charging interface device, power battery
box, air conditioning compressor, drive
motor, vehicle on board charger, etc.
WARNING
• Do not press the maintenance power-off
switch when the ignition switch is in the
“ON” position, otherwise it will cause
electric shock and other conditions.
• When the vehicle is in the state of
charging, the maintenance power-off
switch shall not be pressed.
• It is strictly prohibited to disassemble
the maintenance power-off switch
without the company of professional
maintenance personnel.
• It is strictly prohibited to use other
conductive metals instead of the
maintenance power-off switch.
• The power switch must be cut off before
the vehicle maintenance. Live operation is
strictly prohibited.
In caso di emergenza o manutenzione,
premere l’interruttore di emergenza prima
di effettuare qualsiasi intervento, in modo
da interrompere l’alta tensione ed evitare
scosse. È necessario premere l’interruttore di
emergenza nelle seguenti circostanze:
• Revisione di tutte le parti dei moduli ad
alta tensione
• Revisione di tutte le parti collegate alla
batteria di alimentazione
• Revisione di parti che richiedono
la rimozione o lo spostamento di
componenti ad alta tensione.
