76
The key start switch has three power states,
namely: “OFF” state: the power system is
off. “ACC” status: turn on the power of some
electrical equipment in the car, such as large
touch-screen interactive multimedia screens,
etc. “ON” state: turn on the power of all
electrical equipment of the car, and the car
will start self-checking
Start / stop
Power state switching
ATTENTION
• It is normal to hear the light working
sound of the vacuum pump for a few
seconds when the vehicle is at rest after
starting.
ATTENTION
• After the vehicle is powered off, it can
be restarted after 5s, otherwise the
vehicle may report a malfunction.
Start function
Step the brake pedal, and the current state
is in OFF or ACC or IGN, and press the
start button. If a legitimate key is found,
the electronic steering column lock will be
equipped with ACC electric and unlocks first,
and the unlocking state of the electronic
steering column lock will be detected. If it is
unlocked normally, a signal of “approval of
ignition key” CAN be output. IGN distribution
output; Then output the high voltage request
signal, triggering the high voltage; With
a long buzzer, enter the START gear. If
the electronic steering column lock is not
unlocked successfully, then the signal of
“Approval of Ignition Key” remains 0, and
no high-voltage request signal is output.
The buzzer will beep three times to indicate
abnormality.
Emergency stop function
If the current status is in “ON” or “START”
status, press the START button again. If the
current speed is less than 20km/h, “ACC/
IGN” will power down and return to “POW-
OFF” status. When the speed is greater than
20km/h, it is necessary to press the start
button for 4S before the power is off.
Switch state
Operations
Changed to “ACC”
The power state is “OFF”, the
remote control key is in the car,
press a key to start the switch,
and at the same time unlock the
electronic Steering column lock.
Switch to “ON”
The power state is “OFF” or
“ACC”, the gear knob switch is
turned to the “N gear position,
the remote control key is in the
car, and the brake pedal is not
depressed, press a key again to
start the opening turn off.
Switch to “OFF”
The power state is “ON” or
“ACC”, the gear knob switch is
turned to the “N gear position,
the foot is on the brake pedal,
and the vehicle speed is 0km/h,
Press a key to start the switch.
Charging
device
Lighting
device
Vehicle
device
Emergency
treatment
Technical
information
Instrument &
control devices
Safety
device
Starting &
driving
Repair &
maintenance
