Administrator Tools
Xerox
®
WorkCentre
®
6655 Color Multifunction Printer 255
System Administrator Guide
Manually Updating the Software Using a USB Flash Drive
1.
On your USB Flash Drive, create a directory and name it UPGRADE, then copy the .dlm file into this
directory.
Note:
You can have only one .dlm file in the UPGRADE directory.
2.
To turn off the printer, press the
Power
button.
3.
Insert your USB Flash drive into the USB port on the side of the printer.
4.
To begin the software upgrade, restart the printer.
5.
When prompted, remove the flash drive.
6.
To restart the printer, press
0.
Configuring Automatic Updates
You can configure the printer to connect routinely to an FTP directory on your network to update printer
software automatically. First, manually download the latest software file and copy it to the location on
the FTP server. The printer retains all configured network settings and installed options after the
software upgrade processes.
1.
In CentreWare Internet Services, click
Properties
>
General Setup
>
Software Upgrade
.
2.
If the feature is not displayed, click
Allow Upgrade
.
3.
Click the
Auto
tab.
4.
Under Auto Upgrade, select
Enabled
.
5.
Under Refresh Start Time, select
Hourly
or
Daily
.
If you select Daily, type the time in hours and minutes.
6.
Under Protocol, select the address type. Options include
IPv4
,
IPv6
, or
Host Name
.
7.
In the address field, type the appropriately formatted address and port number of the server where
the upgrade software is located. The default port number is 21.
8.
In the Directory Path field, type the full path to the software upgrade file located on the server in
.dlm
format.
9.
Type the
Login Name
that the printer uses to access the server.
10.
Type the password, then type the password again to verify.
11.
To update an existing password, select
Select to save new password
.
12.
Click
Apply
.
Note:
Software installation begins several minutes after the software is submitted to the printer.
Once installation begins, CentreWare Internet Services is disabled. You can monitor the installation
progress from the printer control panel.