Xerox WORKCENTER 5222 Скачать руководство пользователя страница 269

Страница: 269 / 444

E-mail Environments

269

E-mail Environments

System Requirements

The following are required for the machine.

• Scan To E-mail Kit is required to send scanned documents as e-mail attachments.

• The machine is connected to the network using TCP/IP.

• The environment allows the sending and receiving of e-mail.

NOTE:

A file may not be printed if the format differs from those in the above table.

NOTE:

It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as

the e-mail software.

E-mail Installation

This section describes how to enable the e-mail feature.

Installation Procedure

To use the e-mail feature, configure the following settings on the machine.

Network Communication Setup

Use the touch screen to set the following ports to [Enabled].

• Receive E-mail

• Send E-mail

• E-mail Notification Service
Then, set the IP address.
Finally, set the other items required for the e-mail feature.

Test Mail

An e-mail job should be submitted to make sure that the machine has been installed
and configured correctly.

Item

Correspondent Specifications

ITU-T Recommendations

ITU-T T.37, T.30, F.185 and E.164

E-mail forwarding

RFC2304, RFC2305

DSN function

RFC1891, 1894

MDN function

RFC2298

SMTP receiving

RFC821, 822, 1869

POP3 receiving

RFC1939

MIME version

Version1.0 (RFC2049)

Содержание WORKCENTER 5222





























































































































































































































































































































































































































































Результаты поиска

Содержание WORKCENTER 5222

Отзывы:

Похожие инструкции для WORKCENTER 5222

Бренды по названию

Популярные бренды

Xerox WORKCENTER 5222, Руководство системного администратора

Результаты поиска

Содержание WORKCENTER 5222

Отзывы:

Похожие инструкции для WORKCENTER 5222

Бренды по названию

Популярные бренды