Xerox Phaser 4622, Руководство системного администратора, Страница: 86 / 155

Security
Phaser 4622
System Administrator Guide 80
802.1X Authentication
This is the procedure to follow to install and setup 802.1X Authentication:
1. Overview on page 80
2. Information Checklist on page 80
3. Enable 802.1X on page 80
Overview
The Xerox machine supports IEEE 802.1X Authentication via Extensible Authentication Protocol (EAP).
IEEE 802.1X ensures all machines on the network are authenticated and authorized to use the network.
802.1X can be enabled for machines connected through wired Ethernet networks.
The Administrator can configure the machine to use one EAP type. EAP types supported on the Xerox
machine are:
• EAP-MD5
• PEAPv0/EAP-MS-CHAPv2
• EAP-MS-CHAPv2
• EAP-TLS
Note EAP-TLS may only be configured via Centre Ware Internet Services
Information Checklist
1. 802.1X authentication must be supported on the network where Xerox machines are connected.
2. Ensure that your 802.1X Authentication Server and authentication switch are available on the
network.
3. Create a Username and Password on your Authentication Server which will be used to
authenticate the machine.
Note Write down the Username and Password and keep in a safe place.
Enable 802.1X
Enable 802.1X at the machine
1. Press the Menu button on the machine and select Tools .
2. Enter the Administrator’s Password . The default is 1111 and press the OK button
3. Select Setup and press the OK button.
4. Select Network Settings and press the OK button.
5. Select Network Services and press the OK button.
6. Select 802.1x and press the OK button.
7. Select On and press the OK button.
8. Select the EAP type used on the network and press the OK button.
9. Using the number keys, enter the User Name then press the OK button.