background image

Printer Drivers

Phaser 4622
System Administrator Guide

58

h.

Verify that the test page is printed at the machine.

Note 

Windows Vista or later:

a.

Click on

 Installable Options

.

b.

If Bi-Directional setup has not been enabled, then select the options that are installed on the 
machine.

c.

Click on

 

the 

OK

 button.

d.

Click on

 Printing Preferences

.

e.

Change any default printer settings, as required.

f.

Click on

 

the 

OK

 button.

g.

Verify that the test page is printed at the machine.

Manual Printer Driver Configuration

To configure the printer driver without using Bi-Directional communication:

1.

Follow the steps below that are specific to your operating system:

Windows Vista or later 

a.

Right-click on the printer in the 

Printers

 list and select

 Properties

.

Windows 2003

a.

From the

 Start

 menu, click on

 Settings

 then

 Printers

.

b.

Right-click on the printer icon and select

 Properties

.

Windows XP

a.

From the

 Start

 menu, click on

 Printers and Faxes

.

Note 

If you cannot see

 Printers and Faxes

 in the

 Start 

menu, then click on

 Start

, followed by

 

Control Panel

.

b.

Right-click on the printer icon and select

 Properties

.

2.

Click on the

 Configuration

 tab.

3.

Click on

 Installable Options

.

4.

Select the options that are installed on the machine.

5.

Click on

 

the 

OK

 button.

6.

Click on the

 General

 tab.

7.

Click on

 Print Test Page

.

8.

Click on

 

the 

OK

 button to close the

 Test Page

 window.

9.

Click on

 Printing Preferences

.

10. Change any default printer settings, as required.

11. Verify that the test page is printed at the machine.

Содержание Phaser 4622




























































































































































Отзывы: