Printer Drivers
Phaser 4622
System Administrator Guide
48
17. Select the
Printer Model
and Click on
the
OK
button.
18. Click on
Yes
if you wish to make this the default printer.
19. Click on the
Next
button.
20. Click on the
Finish
button.
Raw TCP/IP Printing (Port 9100)
Raw TCP/IP is a printing protocol that is similar to LPR printing. Also known as a direct TCP/IP
connection or sockets interface, it sends information directly to the machine and does not require a
Line Printer Daemon (LPD). The advantages are that connections stay open for multiple print files and
spooling is not needed, therefore, printing is faster and more reliable than LPD printing. Raw TCP/IP
printing is contained in various third-party applications and operating systems.
Raw TCP/IP Printing is enabled by default for port 9100.
Information Checklist
See Chapter 3, Configure Static Addressing using the Machine,
Information Checklist
on page 15.
How to Configure Port 9100
1.
At your workstation, open the Web browser and enter the
TCP/IP address
of the machine in the
Address bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab.
4.
Click on the
Connectivity
link.
5.
Click on the
Protocols
link.
6.
Select
Raw TCP/IP Printing
in the directory tree.
7.
Click the
Enabled
checkbox to enable the Protocol.
8.
Enter the required port number (1 - 65535).
9.
Click on
Apply
to accept the changes or
Undo
to return the settings to their previous values.
Note
The settings are not applied until you restart the machine.
10. Click on the
Status
tab.
11. Click on the
Reboot Machine
button and click on
OK
to reboot machine. The network controller
takes approximately 60 seconds to reboot and network connectivity will be unavailable during this
time.
Install Printer Driver
1.
At your Workstation, from the
Start
menu, select the appropriate option from the following:
•
For Windows 2003, click on
Settings
then
Printers
.
•
For Windows XP, click on
Printers and Faxes
. If you cannot see
this option in the
Start
menu, then click on
Start
, followed by
Control Panel
first.
•
For Windows Vista or later, click on
Control Panel
then
Printers
.
2.
Click on
Add Printer
in the far left column.
3.
The
Add Printer Wizard
window will appear. Click on the
Next
button.
Содержание Phaser 4622
