![background image](http://html1.mh-extra.com/html/xerox/phaser-4622/phaser-4622_system-administrator-manual_885554022.webp)
Network Installation
Phaser 4622
System Administrator Guide
16
DNS Configuration
1.
Press the
Menu
button on the machine and select
Tools
.
2.
Enter the Administrator’s
Password
. The default is
1111
and press the
OK
button
3.
Select
Setup
and press the
OK
button.
4.
Select
Network Settings
and press the
OK
button.
5.
Select
TCP/IPv4
and press the
OK
button.
6.
Select
Static
and press the
OK
button.
7.
Select
Primary DNS Address
and press the
OK
button.
8.
Use the arrow keys to set the IP address of the primary DNS server, then press
OK
.
9.
Select
Secondary DNS Address
and press the
OK
button.
10. Use the arrow keys to set the IP address of the secondary DNS server, then press
OK
.
Note
An additional alternative DNS address can be set via CentreWare Internet Services.
Note
If DHCP is enabled, the Alternate DNS server information is not available as a feature
summary.
It is recommended that you change the default administrator password to a more secure password, so
this Xerox device is not compromised.
Configure Dynamic Addressing
Information Checklist
Before starting the installation procedure, please ensure that the following items are available and/or
the tasks have been performed:
1.
Existing operational network
utilising the
TCP/IP protocol
.
2.
DHCP or BOOTP Server
should be available on the network.
3.
Machine should be
connected to the network via Ethernet Cable
.
Procedure
Installation via DHCP (Dynamic Host Configuration Protocol)
DHCP is enabled on the machine by default. If the machine is connected to the network, the TCP/IP
information will be configured when the machine is powered on and no further configuration is
required.
1.
Print a Configuration Report
to verify that the information was assigned correctly. Follow the
steps on page 9
Installation via BOOTP or DHCP
Ensure your machine is connected to the network with Ethernet cabling.
1.
At your Workstation, open your web browser and enter the
TCP/IP Address
of the machine in the
Address bar.
2.
Press
Enter
.
Содержание Phaser 4622
