Xerox 2101, Руководство по настройке

Страница: 25 / 192

2
2-1 Fiery EX2101 on a TCP/IP network with Windows NT 4.0/2000/XP/2003
This chapter describes environments that typically include one or more network
servers—Novell NetWare servers and Windows NT 4.0/2000/2003 servers—that
share printing to the Fiery EX2101. It describes setting up servers that use IPX/SPX
or TCP/IP protocols for communicating with the Fiery EX2101. In addition, it
includes guidelines for setting up direct communication from Windows NT 4.0
/2000/XP/2003 workstations or UNIX workstations, where a network server is
optional. This chapter also outlines the requirements for users to print to the
Fiery EX2101 and run Fiery utilities and Fiery WebTools.
The Fiery EX2101 can accept jobs concurrently from NetWare and
Windows NT 4.0/ 2000/2003 servers, as well as jobs sent directly from
Windows NT 4.0/2000/XP/2003 or UNIX workstations. Because AppleShare
servers require no special configuration, they are not discussed in this chapter, except
for use in a Windows NT 4.0/2000/2003 environment (see the following section,
“Fiery EX2101 on a TCP/IP network with Windows NT 4.0/2000/XP/2003” ).
N
OTE
:
The Fiery EX2101 does not support the Windows 2000/2003 Active Directory
service.
If your network is based on Windows NT 4.0/2000/2003, proceed to the following
section. For information on UNIX workstations, proceed to
“Fiery EX2101 on a
network with UNIX workstations” on page 2-16.
Fiery EX2101 on a TCP/IP network with
Windows NT 4.0/2000/XP/2003
When a Windows NT 4.0/2000/XP/2003 computer is configured to connect to the
Fiery EX2101 using TCP/IP, it can print directly to the Fiery EX2101. If the computer
shares the printer over the network, it is acting as a print server to Windows 9x/Me and
Windows NT 4.0/2000/XP clients. Client computers print to the Fiery EX2101 by
printing to the Windows NT 4.0/2000/2003 print server. You can then monitor and
control printing at the Windows NT 4.0/2000/2003 server computer.
Chapter 2:
Setting up
Network Servers