Xerox 2101, Руководство по настройке

Страница: 55 / 192

3
3-11 About Setup
If you do not have the FACI installed, you can launch anti-virus software from a
remote workstation and scan the Fiery EX2101 hard disk. However, this operation is
not supported. For support of this operation, we recommend that the network
administrator to consult directly with the anti-virus software manufacturer.
About the Fiery EX2101 default password
The Fiery EX2101 is set with the Windows XP default password “Fiery.1” for
security reasons. This is in compliance with security policies stipulated by Microsoft
Corporation. To ensure network security in your environment, the administrator must
set a password.
Changing the Fiery EX2101 system password
Change the default password from a Windows 98/Me client computer by using the
following procedure.
If you have the FACI installed, you can change the Fiery EX2101 administrator
password in the same way you set the password for a Windows
XP workstation
(see page 3-12 ).
N
OTE
:
If you leave the password blank or specify too short of a password, you are
prompted to set a new one.
T
O CHANGE THE
F
IERY
EX2101
DEFAULT PASSWORD FROM
W
INDOWS
98/M
E COMPUTERS
1. Click Start in the Window 98/Me taskbar, choose Programs, and then choose
MS-DOS Prompt.
The MS-DOS Prompt window appears.
2. At the command prompt, type the following.
For example, if you want to change to “Fiery.2”:
> net password\\Fiery EX2101Name Administrator Fiery.1 Fiery.2
N
OTE
:
“Fiery EX2101Name” depends on your Fiery EX2101 system settings.
3. Press Enter.
The new password “Fiery. 2” is now set.
4. At the command prompt, type Exit.