Xerox 2101, Руководство по настройке

Страница: 14 / 192

1
1-2 Connecting to the Network
When you add the Fiery EX2101 to a network, it is assumed that a network
administrator has already installed a network cabling system and connected
workstations and servers.
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
• Physically connecting the Fiery EX2101 to a functioning network
Prepare a network node for the Fiery EX2101—obtain cable, route it to the location
where the Fiery EX2101 will be installed (near the copier), and attach the cable to the
network interface of the Fiery EX2101. For details, see
“Ensuring the copier
connection” on page 3-9.
N
OTE
:
If you plan to run Command WorkStation software, install the software and
connect the Command WorkStation computer to the network along with the
Fiery EX2101. For more information, see the
User Software Installation Guide .
• Configuring the network server
When network servers are required, configure those servers to provide client access to
the Fiery EX2101 as a PCL or PostScript printer. For information on configuring
network servers in Windows and UNIX network environments, see
Chapter 2 .
• Setting up the Fiery EX2101
Configure the Fiery EX2101 for your particular printing and network environment.
For details, first read
Chapter 2 , and then see subsequent chapters.
• Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the Fiery EX2101 over the network. These steps are described in the
User
Software Installation Guide , and some information is also provided in Chapter 2 .
• Administering the Fiery EX2101
Monitor and maintain system performance and troubleshoot problems that arise.
For details, see
Chapter 7 of this manual and the Job Management Guide .