Xerox 2101, Руководство по настройке

Страница: 69 / 192

4
4-13 Network Setup options
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
Fiery EX2101 hard disk. If disk space is low, use a smaller value for saved jobs.
Preview While Processing
Yes/No [No]
Specify whether a preview thumbnail should be displayed in the Command
WorkStation when a job is being processed. If you select Yes, the preview thumbnail is
always displayed in the Processing section of the Activity Monitor.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
Network Setup options
When you perform network Setup, you configure the Fiery EX2101 to receive print
jobs over the network systems that are used at your site.
If the Fiery EX2101 is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job.
In the Setup menu, choose Network Setup, where you specify network addresses and
names to be used by workstations, servers, and the Fiery EX2101 when they
communicate with each other.
The Network Setup menu includes three submenus that allow you to choose port
types, protocols, and network services. You must perform Port Setup and enable at
least one port.
For each item you enable, you are prompted to enter settings for that item.
Default values, where applicable, appear in this manual with square brackets.
Display and select options only for the network systems that are currently used at your
site. If your network requirements change, you can change Network Setup at any time.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup