Xerox 2101, Руководство по настройке

Страница: 40 / 192

2
2-16 Setting up Network Servers
Fiery EX2101 on a network with UNIX workstations
When a UNIX workstation is configured with the lpd protocol and connected to the
Fiery EX2101 over a TCP/IP network, it can print directly to the Fiery EX2101.
Setting up UNIX workstations requires an administrator with root privileges. After the
initial configuration, UNIX users simply submit print jobs to a named printer.
The job management tools, along with the other Fiery utilities and WebTools, are
unavailable on the UNIX platform. A Windows or Mac OS computer on the same
network as the UNIX computer that is set up to use TCP/IP for printing to the
Fiery EX2101 can use the job management tools to manage print jobs that originate
from all workstations on the network.
Tips for experts—UNIX workstations
Setting up the Fiery EX2101 in a UNIX environment has the same requirements as
setting up any printer or new device:
• A distinct IP address is required for the Fiery EX2101 as well as for each workstation
on the network.
• A name must be selected for the Fiery EX2101 that goes with the IP address.
• The IP address of the Fiery EX2101 must be registered for the network in a host
database, and also on the Fiery EX2101 itself.
• At least one print connection (Print or Hold) must be published.
The following information applies especially to the Fiery EX2101:
• The Fiery EX2101 is a printer controller that understands lpd protocols.
• The Fiery EX2101 has a remote printer name you must use in order to communicate
with it successfully.
For details, see the following section.