Commercial SmartPad LCD
¥
Page:
41
© 2006 Xantech Corporation
PLACING COMMANDS ONTO THE GTL’s (Creating Macro’s)
All of the IR Codes (Palettes or IR Command Groups) should be confirmed and tested before continuing (Same
goes for RS232 Commands -
ADVANCED
only). In the sections to follow, you will be setting up the Keypads for
use in controlling the system. This will consist of setting up the Source Icons, placing IR or RS232 commands
onto the Virtual Keypad, and setting up power management to name a few.
Selecting IR Palettes from the IR Code Library
1. Click on PALETTE in the Universal Dragon menu bar
2. Click on the mode button to change “Mode: Edit” to “Mode: Palette”.
3. Click on the Component Type (i.e. VCR, DVD etc.) and then the Manufacturer.
4. Find the Command Group file previously tested
Selecting IR Palettes
1. Scroll the list (if necessary) and click on the brand of each palette you need for your system. This will
expand the tree to show different components (TV, VCR, DVD). Select the appropriate component.
2. Under each component is a list of IR commands that can be programmed to the CSPLCD.
SELECTING RS232 COMMAND PALETTES
1. From the Palette Menu click “SELECT RS232 COMMAND PALATTE”
2. Follow steps 2 & 3 above under Selecting IR Palettes
ASSOCIATING COMMANDS TO GTL’S (DRAG AND DROP COMMANDS)
1. Select the MACRO’s tab in the SmartPad LCD™ systems window
2. Click the desired Source button on the CSPLCD GUI Display.
3. Click the Function button you wish to place a command under and select the applicable command
from the palette for that component function. The code name (function/brand/component) for that
button will appear in the Macro Command List on the CSPLCD Programming Module.
4. To add additional commands to the same button (i.e. creating a Macro Sequence), just repeat steps 2
& 3. Up to 40 Commands can be placed under each programmable button (See: “Programming
Sequences”)
5. Repeat for all GTL Function buttons and Source Buttons.
P
ROGRAMMING
S
EQUENCES
(M
ACROS
)
All programmable buttons on the CM8X8/MRC88 Keypad can be programmed to send IR sequences of
up to 40 commands (all buttons except for Volume UP/DOWN and STATUS).
1. Click the button to be programmed.
2. Open all palettes to be used in the sequence.
3. In the palette, click on the commands in the order of the sequence to be sent.
4. The order of the commands in the sequence can be changed by simply
dragging
the command
towards the desired position in the list. Press and hold the left mouse button with the cursor over the
desired command. While holding, drag the command to the desired position in the list and release.
NOTE:
As you drag a command upward in the list and you want the command between two existing
commands, drop it on the lower one. As you drag downward, drop it on the upper one.
T
IMED
D
ELAYS
Timed Delays can be placed in a sequence. This is desired in macros where a
delay
is needed between
two commands to allow for a unit to respond completely to the previous command (i.e. After a POWER ON
command is given a Delay is usually necessary before the next command will be recognized or when
entering multiple digit channel commands to a CBL or SAT box).
1. Click the left
<
and right
>
arrows under “DELAY” in the Macro Command List window for the number of
seconds you want up to 30 seconds (i.e. 2 = 2 seconds) or simply highlight the number in the Delay
window and enter the number using the keyboard.
2. Double-click the word “DELAY” or if entering from the keyboard simply hit ENTER on the keyboard.
This will place the delay at the end of the Command List and the delay time appears on the list (e.g.,
Delay 2 Sec).
Содержание CSPLCD39G
