Xantech CSPLCD39G, Инструкция по установке и программированию

Страница: 53 / 80

Commercial SmartPad LCD ¥ Page: 53
© 2006 Xantech Corporation
Figure 32 – RC68+ Handheld Programmer Code Group
BANK TRACK CODE GROUP
When the SmartPad LCD™ is used in a system in conjunction with other controllers (i.e. Handheld remotes or
other CSPLCD panels) in which the equipment can be controlled from multiple locations, the CSPLCD panels
have the ability to track source selections simultaneously for in-sync operation with the current source selection.
i.e. If the user walks in a room and selects DVD on the CSPLCD and then decides to select CD using a
handheld remote, the CSPLCD will automatically switch to the CD source page. This works the same if multiple
CSPLCD’s are used in a large room and a selection is made on one panel, the other panels will automatically
switch to the same source page currently selected.
The default Bank Track Code Group is D8 .
STATUS LED SETTINGS
The Status LED ( Figure 2-3 ) can be configured to track the STATUS line on the rear of the CSPLCD ( Figure
3-19C ). If this is desired the TRACK LED SETTINGS dialog box should be set to YES. The Default setting is
NO.
When the TRACK LED SETTING is set to YES, the STATUS LED will turn ON whenever a positive voltage (5-
30VDC) is present at the STATUS Terminal on the rear of the CSPLCD. Whenever this voltage is LOW (0VDC)
the LED will turn OFF.
This works in conjunction with the STATUS LINE role setting.
STATUS LINE ROLE SETTING
The Status Line on the rear of the CSPLCD ( Figure 3-19C ) can be configured as either an INPUT to sense a
state of an external device or as an OUTPUT to control some external device.