Page: 22
SmartPad LCD
¥
© 2006 Xantech Corporation
Section 4: Programming the SmartPad LCD
™
Programming the SmartPadLCD system is a two-step process:
1. Creating the GUI (Graphical User Interface) Screens.
2. Assigning
functions
(marcos) to the GTL’s (Graphical Touch Links) to control external devices.
Through Universal Dragon Drop-IR™ Software, both of these tasks are easily performed. The software contains
built-in
Style
libraries for creating the GUI screens as well as
IR-Code
libraries for programming each of the
GTL’s. This makes programming the CSPLCD a very quick and easy process.
INSTALLING AND CONFIGURING THE UNIVERSAL DRAGON SOFTWARE
COMPUTER REQUIREMENTS (MINIMUM)
x
1.5GHz or greater processor (CPU)
x
Windows 2000 and Windows XP
x
650 MB Hard Drive space (you will need more as your libraries and projects expand)
x
256 MB RAM (512 MB preferred)
x
Mouse
INCLUDED HARDWARE & SOFTWARE ITEMS
The SmartPad LCD Universal Dragon Drop-IR package includes:
x
Universal Dragon Drop CD ROM
x
DB9 Male to 3 Pin Programming Cable (Part No.03972440). Connects the CSPLCD Programming Port
(
Figure 2-7
) to the DB9 COM PORT on your PC.
x
USB Programming (Part No.05913660). Connects the CSPLCD USB Programming Port (
Figure 2-9
) to the
PC’s USB port.
CONNECTING THE SMARTPAD LCD™ TO THE PC
To program the SmartPad LCD™, the unit will need to be connected to a PC.
DB9 S
ERIAL
C
ONNECTION
Connect the supplied DB9 programming cable to your PC serial port and the other end to the 3 pin
connector located under the bezel on the front panel of the CSPLCD –
Figure 2-7
.
USB S
ERIAL
C
ONNECTION
Connect the
wide
end of the included USB cable to the USB port of your PC and the
small
end to the
connector on the front panel of the CSPLCD –
Figure 2-9
.
NOTE:
The USB connection requires a ‘B’ Type connector to interface with the SmartPad LCD™.
Connecting a cable into this port will automatically override any device connected to the RS232 COM
port on the front of the CSPLCD.
SOFTWARE INSTALLATION
Windows 2000 and Windows XP
Install the Universal Dragon program onto your hard drive as follows:
1. Insert the disc into your computer’s CD-ROM drive. If your drive has been set for auto run, a Xantech
Welcome Menu will appear. If not, access your CD ROM with Windows Explorer and double click the
file "setup.exe".
2. On the Welcome menu, click NEXT.
3. Follow the on-screen instructions as the program installs. It takes approximately one to three minutes to
complete, depending on the speed of your machine.
Содержание CSPLCD39G
