Commercial SmartPad LCD
¥
Page:
13
© 2006 Xantech Corporation
Section 2: Installation & Connections
INSTALLATION
BACK BOX MOUNTING INSTRUCTIONS
All four models of the CSPLCD Touch Panel are to be mounted into its corresponding junction box (included).
No screws are necessary for affixing this junction box into drywall, lathe & plaster, button board or other
surfaces covering a hollow wall. This wall needs to be at least 3.5” (8.9cm) deep.
A Mounting Template Wall-Cutout is included for precise hole dimensions. There are two models, one for each
display size (3.9” and 6.4”).
NOTE:
The mounting hole size is critical as there is a +0.00” inch tolerance for this cutout. It is imperative that
the provided mounting template be used to assure proper hole size. Check the table below to be sure you are
using the proper Mounting Wall-Cutout Template.
CSPLCD Model # Mounting Template Part No.
CSPLCD39G 08187158
CSPLCD64G 08187157
CSPLCD64V 08187157
CUT OUT
CUT OUT
CUT
OUT
CUT
OUT
Figure 4 – Back Box Mounting Wall-Cutout Template
Please follow the instructions that follow closely:
1. Place the mounting template on the wall as shown in
Figure 4
above.
2. Make sure the Template is level and gently secure to the wall using a hammer
3. Using a hole saw or other cutting tool, carefully cut along the inner guide lines of the Mounting
Template as shown in
Figure 5
below.
Содержание CSPLCD39G
