Page: 34
SmartPad LCD
¥
© 2006 Xantech Corporation
LEARNING IR COMMANDS (XIR2)
An IR Learning Eye is located on the front panel of the CSPLCD and is accessible when the Bezel is removed
(Please see
Figures 2a-2c
Item #5).
Note: Commands learned through the CSPLCD’s front panel learning eye (XIR2 method) are NOT
backwards compatible to other Xantech devices (i.e. MRC44/88, URC-2 etc…). This means, palettes
created in Dragon Drop-IR CSPLCD cannot be copied to previous versions of Dragon Drop-IR software.
Palettes created in earlier version of Dragon Drop-IR software (XIR1 method) CAN be copied into the
CSPLCD software. (i.e. palettes created in DragMRC, Frag450 or Drag460 software CAN be copied and
used in Dragon Drop-IR CSPLCD software).
Note:
When learning IR commands through the front panel learning-eye, it is suggested that the
environment
be free of any IR interference. This could include Fluorescent or Halogen lighting, sunlight, Plasma or LCD
displays and interference from PC Monitor display.
F
INDING THE
O
PTIMAL
P
OSITIONING OF THE
T
EACHING
R
EMOTE
An IR Strength Indicator LED is also located on the front panel (
Figures 2a-2c
Item #6) to let the user know
where the optimal position of the teaching remote should be. Before proceeding, please take the proposed
teaching
remote and keeping it approximately 1-2 inches from the IR Learning Eye, press any button on the
remote and look at the brightness of the LED (
Figure #2a-2c
Item #6). Move the Remote slowly up and down
past the learning eye and find the location where the LED is at its brightest. This will be the location to be used
when recording IR commands.
U
SING THE
P
ALETTE
E
DITOR
NOTE:
The Palette Editor for IR Commands is available whether a project is opened or not.
1. Click on the Palette Editor on the right side of the application if it is closed.
2. Locate and Select (single click) the desired BRAND as shown in
Figure 20
(i.e. Sony, Panasonic etc).
A list of Components will appear. (See later section for ‘Adding Brands’.)
3. Locate and Select (single click) the type of COMPONENT as shown in
Figure 21
(DVD, SAT etc) (See
later section for ‘Adding Components and Functions’).
4. The Palette Editor will now be open to the “Brand” & “Component” selected. A list of FUNCTIONS for
that type of component will appear as shown in
Figure 22
. Review the list of Functions on the left hand
side and compare to the source remote. If your function is not displayed or not named appropriately see
the section entitled ‘Editing Function Names in the Palette Editor.
5. Click on the RECORD button in the middle of the Palette Editor. The RECORD button will become
highlighted. Universal Dragon is now ready to learn the IR codes for the specific brand/component
selected.
Note: Before performing step 6, read steps 6 thru 8 as the RECORD process is a timed function. You
will have 10seconds to perform the process before the system times out.
6. Place
the
Teaching
remote in the optimal position as found above.
7. Select the command the left side of the Palette Editor (i.e. Power, Play, Stop etc.). A message stating
“Waiting For IR” will appear. This process will time-out in 10 seconds.”
8. While continuing to keep the source remote within 1” from the IR learning eye, press and release the
corresponding command button on the source remote. A red symbol will appear to the left of the
selected function indicating that an IR code has been learned.
Note:
If you wait longer than ten seconds, a time-out message will appear. Click “Finish” and try again.
If you continue to have problems learning commands, please see the Trouble Shooting section at the
end of this manual.
Note:
When teaching commands in this fashion, only a
quick tap
of the teaching remote is required.
Do not
press and hold the button until the message goes away.
9. Repeat steps 6 thru 8 for all of the source functions to be used on the CSPLCD Display.
Содержание CSPLCD39G
