WPI MICRO-ePUMP, Инструкция по эксплуатации

Страница: 8 / 32

4 World Precision Instruments
INSTRUMENT DESCRIPTION
Front Panel
Touch screen interface
Adjustment Knob
Injector Port
MICRO-ePORE™ Interface Cable Port
Fig. 2—The major features of the MICRO-ePUMP are labeled in this diagram.
Touch Screen Interface – The responsive panel allows for intuitive control. Touch
the injection counter to reset it, the tank pressure gauge to refill the tank, Clear Tip to
blow a blast of air through the pipette tip, a parameter to modify it using the knob, or
the settings area to adjust the settings.
Adjustment Knob – Rotate the adjustment knob to change the highlighted
parameter. Press it to toggle between gross and fine tune controls.
MICRO-ePORE™ Interface Cable Port – If you are using the MICRO-ePORE™ ,
connect the Microelectrode Interface Cable (probe cable) to this port. Press the
connector into the port. This cable is labeled as Front Panel.
Fig. 3—The Interface Cable Connector is labeled “Front Panel.” Do NOT plug it into the foot
switch port on the rear panel.
Injector Port – Plug the easy connect connector on the tubing into this port.