WPI MICRO-ePUMP, Инструкция по эксплуатации

Страница: 25 / 32

MICRO-ePUMP
World Precision Instruments 21
MAINTENANCE
The MICRO-ePUMP has been designed to yield reliable performance. However, some
laboratory conditions may require occasional replacement of the pressure filters. If
this is necessary, return the instrument to the factory. If the unit displays a warning
indicating that the pump needs service, please return it to the factory.
Fig. 36—Warning errors like this one display when the unit needs to be returned to the
factory for routine service.
Cleaning
Do not use alcohol, aromatic hydrocarbons or chlorinated solvents for cleaning. They
may adversely react with plastic materials used to manufacture the instrument. The
exterior of this instrument may be cleaned periodically to remove dust, grease and
other contamination. There is no need to clean the inside. Use a soft cloth dampened
with a mild solution of detergent and water. Do not use abrasive cleaners.
ACCESSORIES
Part Number Description
75122-110 Glass gasket green 1.0 mm, pkg. of 10
75122-210 Glass gasket black 1.2 mm, pkg. of 10
75122-310 Glass gasket red 1.5 mm, pkg. of 10
75122-410 Glass gasket white 1.65 mm, pkg. of 10
75125-6 Replacement Pipette Holder for 5430-ALL, pkg. of 6
300683 Microelectrode Holder for the MICRO-ePORE™
300744 MICRO-ePUMP Capillary Kit
TROUBLESHOOTING
The MICRO-ePUMP continuously monitors the tank pressure to detect malfunctions
in the pressure system. Depending on the fault detected, different error messages
are displayed. When errors are detected an error screen with the error number and
suggested action is displayed. Upon exiting the Error Screen, the system returns to
the main screen with the Injection Port disabled. After addressing the failure source,