WPI MICRO-ePUMP, Инструкция по эксплуатации

Страница: 7 / 32

MICRO-ePUMP
World Precision Instruments 3
Notes and Warnings
!
WARNING: SECURE THE PIPETTE FIRMLY IN THE HOLDER. WHEN HIGH
PRESSURE IS APPLIED, A LOOSE PIPETTE CAN BE EJECTED FORCEFULLY.
DO NOT APPLY PRESSURES IN EXCESS OF 100 PSI (100 KPA).
!
WARNING: THIS INSTRUMENT IS FOR INVESTIGATIONAL USE ONLY IN
ANIMALS OR OTHER TESTS THAT DO NOT INVOLVE HUMAN SUBJECTS.
Parts List
After unpacking, verify that there is no visible damage to the instrument. Verify that all
items are included:
(1) MICRO-ePUMP
(1) Foot switch
(2)
300863 WPI MICRO-ePORE™ Electrode Holders (Electrode holder includes an
electrode holder startup kit.)
(1) 300744 MICRO-ePUMP Capillary Kit which includes:
(4) 1.0 mm pipette gaskets (green)
(4) 1.2 mm pipette gaskets (black)
(4) 1.5 mm pipette gaskets (red)
(4) 1.65 mm pipette gaskets (white)
(1) Pipette handle
(1) MICRO-ePORE injection assembly
(2) Sealing o-rings
(1) Pipette holder
(1) MICRO-ePUMP tubing assembly
(1) MICRO-ePUMP adapter tubing assembly
(1) AC/DC 24 V Power Adapter
(1) Instruction Manual (available online at www.wpiinc.com/manuals)
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and
check for possible damage. Missing cartons or obvious damage to cartons should be
noted on the delivery receipt before signing. Concealed damage should be reported
at once to the carrier and an inspection requested. Please read the section entitled
“Claims and Returns” on page 27 of this manual. Please contact WPI Customer
Service if any parts are missing at (941) 371-1003 or customerservice@wpiinc.com.
Returns: Do not return any goods to WPI without obtaining prior approval (RMA
# required) and instructions from WPI’s Returns Department. Goods returned
(unauthorized) by collect freight may be refused. If a return shipment is necessary, use
the original container, if possible. If the original container is not available, use a suitable
substitute that is rigid and of adequate size. Wrap the instrument in paper or plastic
surrounded with at least 100 mm (four inches) of shock absorbing material. For further
details, please read the section entitled “Claims and Returns” on page 27 of this manual.