WPI MICRO-ePUMP, Инструкция по эксплуатации

Страница: 17 / 32

MICRO-ePUMP
World Precision Instruments 13
Changing the MICRO-ePORE™ Parameters
1. When the MICRO-ePORE™ is disabled, the home screen does not show the
MICRO-ePORE™ parameters in the bottom half of the screen. To enable the
MICRO-ePORE™ , touch the Settings area of the main screen to go to Settings
menu.
Fig. 23— The MICRO-ePORE™ is disabled in this configuration. No parameters show in the
bottom half of the screen.
2. Tap a parameter and turn the knob to change the parameter.
Fig. 24—Touch the Frequency parameter or the Amplitude parameter and rotate the knob.
3. Two seconds after a parameter is adjusted, it is saved into the memory. If you move
from one parameter to the next before two seconds, the first parameter is automatically
saved into the memory as the working parameter. This setting will be recalled on power
up.
NOTE : This is different from saving parameter sets to load.