WPI MICRO-ePUMP, Инструкция по эксплуатации

Страница: 18 / 32

14 World Precision Instruments
Refilling the Air Tank
1. The internal pump reservoir automatically replenishes itself when it fall below
90% of its full capacity.
2. To reset the pump manually, press the gauge meter on the touchscreen, and the
reservoirs starts refilling.
Fig. 25— (Left) Touch the gauge to start refilling the reservoir.
Fig. 26—(Right) When the tank is fully charged at 100 PSI, the tank reserve gauge is green.
Resetting the Injection Counter
This area in the upper left corner shows the injection count. Whenever the foot switch
is fully depressed, the injection counter increments. Reset it to zero by pressing on the
Injections area of the main display touchscreen.
Adjust the MICRO-ePUMP Settings
The setting section (bottom right corner of the main screen) displays the current settings:
• MICRO-ePORE™ status (Off or On)
• MICRO-ePUMP mode (Manual or Timed)
Fig. 27—(Left) The Setting area is located in the bottom right corner of the main screen.
Fig. 28—(Right) Touch the Setting area to display the Settings menu.
1. To modify these settings, press the Settings section on the touchscreen.
2. From there, you can make the following adjustments:
• Disable or enable the MICRO-ePORE™ .