background image

Each version is given a distinguishing version number. If the Program 

specifies a version number of this License which applies to it and "any 

later version", you have the option of following the terms and conditions 

either of that version or of any later version published by the Free 

Software Foundation. If the Program does not specify a version number 

of this License, you may choose any version ever published by the Free 

Software Foundation.
10. If you wish to incorporate parts of the Program into other free 

programs whose distribution conditions are different, write to the author 

to ask for permission. For software which is copyrighted by the Free 

Software Foundation, write to the Free Software Foundation; we 

sometimes make exceptions for this. Our decision will be guided by the 

two goals of preserving the free status of all derivatives of our free 

software and of promoting the sharing and reuse of software generally.

nO WArrAntY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, 

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT 

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE 

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER 

PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF 

ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 

FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO 

THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. 

SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE 

COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY 

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO 

LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR 

LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF 

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN 

IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES.

end OF terMS And cOnditiOnS
how to Apply these terms to Your new programs

If you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make it free 

software which everyone can redistribute and change under these terms. 
To do so, attach the following notices to the program. It is safest to 

attach them to the start of each source file to most effectively convey the 

exclusion of warranty; and each file should have at least the "copyright" 

line and a pointer to where the full notice is found. 

one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 

the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 

USA.
Also add information on how to contact you by electronic and paper mail. 
If the program is interactive, make it output a short notice like this when it 

starts in an interactive mode: 
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type `show c' 
for details.

The hypothetical commands `show w' and `show c' should show the 

appropriate parts of the General Public License. Of course, the 

commands you use may be called something other than `show w' and 

`show c'; they could even be mouse-clicks or menu items--whatever 

suits your program. 
You should also get your employer (if you work as a programmer) or your 

school, if any, to sign a "copyright disclaimer" for the program, if 

necessary. Here is a sample; alter the names: 
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision'
(which makes passes at compilers) written 
by James Hacker.

signature of Ty Coon

, 1 April 1989

Ty Coon, President of Vice
This General Public License does not permit incorporating your program 

into proprietary programs. If your program is a subroutine library, you 

may consider it more useful to permit linking proprietary applications with 

the library. If this is what you want to do, use the GNU Lesser General 

Public License instead of this License. 

Gnu General public License

Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this 

license document, but changing it is not allowed.

preamble

The GNU General Public License is a free, copyleft license for software 

and other kinds of works.
The licenses for most software and other practical works are designed to 

take away your freedom to share and change the works. By contrast, the 

GNU General Public License is intended to guarantee your freedom to 

share and change all versions of a program--to make sure it remains free 

software for all its users. We, the Free Software Foundation, use the 

GNU General Public License for most of our software; it applies also to 

any other work released this way by its authors. You can apply it to your 

programs, too.
When we speak of free software, we are referring to freedom, not price. 

Our General Public Licenses are designed to make sure that you have 

the freedom to distribute copies of free software (and charge for them if 

you wish), that you receive source code or can get it if you want it, that 

you can change the software or use pieces of it in new free programs, 

and that you know you can do these things.
To protect your rights, we need to prevent others from denying you these 

rights or asking you to surrender the rights. Therefore, you have certain 

responsibilities if you distribute copies of the software, or if you modify it: 

responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether gratis 

or for a fee, you must pass on to the recipients the same freedoms that 

you received. You must make sure that they, too, receive or can get the 

source code. And you must show them these terms so they know their 

rights.
Developers that use the GNU GPL protect your rights with two steps: (1) 

assert copyright on the software, and (2) offer you this License giving you 

legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains that 

there is no warranty for this free software. For both users' and authors' 

sake, the GPL requires that modified versions be marked as changed, so 

that their problems will not be attributed erroneously to authors of 

previous versions.
Some devices are designed to deny users access to install or run 

modified versions of the software inside them, although the manufacturer 

can do so. This is fundamentally incompatible with the aim of protecting 

users' freedom to change the software. The systematic pattern of such 

abuse occurs in the area of products for individuals to use, which is 

precisely where it is most unacceptable. Therefore, we have designed 

this version of the GPL to prohibit the practice for those products. If such 

problems arise substantially in other domains, we stand ready to extend 

this provision to those domains in future versions of the GPL, as needed 

to protect the freedom of users.

Finally, every program is threatened constantly by software patents. 

States should not allow patents to restrict development and use of 

software on general-purpose computers, but in those that do, we wish 

to avoid the special danger that patents applied to a free program could 

make it effectively proprietary. To prevent this, the GPL assures that 

patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and 

modification follow.

terMS And cOnditiOnS

0. definitions.

“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of 

works, such as semiconductor masks.
“The Program” refers to any copyrightable work licensed under this 

License. Each licensee is addressed as “you”. “Licensees” and 

“recipients” may be individuals or organizations.
To “modify” a work means to copy from or adapt all or part of the work in 

a fashion requiring copyright permission, other than the making of an 

exact copy. The resulting work is called a “modified version” of the earlier 

work or a work “based on” the earlier work.
A “covered work” means either the unmodified Program or a work based 

on the Program.
To “propagate” a work means to do anything with it that, without 

permission, would make you directly or secondarily liable for infringement 

under applicable copyright law, except executing it on a computer or 

modifying a private copy. Propagation includes copying, distribution (with 

or without modification), making available to the public, and in some 

countries other activities as well.
To “convey” a work means any kind of propagation that enables other 

parties to make or receive copies. Mere interaction with a user through a 

computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the 

extent that it includes a convenient and prominently visible feature that (1) 

displays an appropriate copyright notice, and (2) tells the user that there 

is no warranty for the work (except to the extent that warranties are 

provided), that licensees may convey the work under this License, and 

how to view a copy of this License. If the interface presents a list of user 

commands or options, such as a menu, a prominent item in the list 

meets this criterion.

1. Source code.

The “source code” for a work means the preferred form of the work for 

making modifications to it. “Object code” means any non-source form of 

a work.
A “Standard Interface” means an interface that either is an official 

standard defined by a recognized standards body, or, in the case of 

interfaces specified for a particular programming language, one that is 

widely used among developers working in that language.
The “System Libraries” of an executable work include anything, other 

than the work as a whole, that (a) is included in the normal form of 

packaging a Major Component, but which is not part of that Major 

Component, and (b) serves only to enable use of the work with that 

Major Component, or to implement a Standard Interface for which an 

implementation is available to the public in source code form. A “Major 

Component”, in this context, means a major essential component 

(kernel, window system, and so on) of the specific operating system (if 

any) on which the executable work runs, or a compiler used to produce 

the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means all 

the source code needed to generate, install, and (for an executable work) 

run the object code and to modify the work, including scripts to control 

those activities. However, it does not include the work's System 

Libraries, or general-purpose tools or generally available free programs 

which are used unmodified in performing those activities but which are 

not part of the work. For example, Corresponding Source includes 

interface definition files associated with source files for the work, and the 

source code for shared libraries and dynamically linked subprograms that 

the work is specifically designed to require, such as by intimate data 

communication or control flow between those subprograms and other 

parts of the work.
The Corresponding Source need not include anything that users can 

regenerate automatically from other parts of the Corresponding Source.
The Corresponding Source for a work in source code form is that same 

work.

2. Basic permissions.

All rights granted under this License are granted for the term of copyright 

on the Program, and are irrevocable provided the stated conditions are 

met. This License explicitly affirms your unlimited permission to run the 

unmodified Program. The output from running a covered work is covered 

by this License only if the output, given its content, constitutes a covered 

work. This License acknowledges your rights of fair use or other 

equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not 

convey, without conditions so long as your license otherwise remains in 

force. You may convey covered works to others for the sole purpose of 

having them make modifications exclusively for you, or provide you with 

facilities for running those works, provided that you comply with the 

terms of this License in conveying all material for which you do not 

control copyright. Those thus making or running the covered works for 

you must do so exclusively on your behalf, under your direction and 

control, on terms that prohibit them from making any copies of your 

copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under the 

conditions stated below. Sublicensing is not allowed; section 10 makes it 

unnecessary.

3. protecting users' Legal rights From Anti-circumvention Law.

No covered work shall be deemed part of an effective technological 

measure under any applicable law fulfilling obligations under article 11 of 

the WIPO copyright treaty adopted on 20 December 1996, or similar 

laws prohibiting or restricting circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid 

circumvention of technological measures to the extent such 

circumvention is effected by exercising rights under this License with 

respect to the covered work, and you disclaim any intention to limit 

operation or modification of the work as a means of enforcing, against 

the work's users, your or third parties' legal rights to forbid circumvention 

of technological measures.

4. conveying Verbatim copies.

You may convey verbatim copies of the Program's source code as you 

receive it, in any medium, provided that you conspicuously and 

appropriately publish on each copy an appropriate copyright notice; 

keep intact all notices stating that this License and any non-permissive 

terms added in accord with section 7 apply to the code; keep intact all 

notices of the absence of any warranty; and give all recipients a copy of 

this License along with the Program.
You may charge any price or no price for each copy that you convey, and 

you may offer support or warranty protection for a fee.

5. conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to 

produce it from the Program, in the form of source code under the terms 

of section 4, provided that you also meet all of these conditions:

a) The work must carry prominent notices stating that you modified it, 

and giving a relevant date.
b) The work must carry prominent notices stating that it is released 

under this License and any conditions added under section 7. This 

requirement modifies the requirement in section 4 to “keep intact all 

notices”.
c) You must license the entire work, as a whole, under this License to 

anyone who comes into possession of a copy. This License will 

therefore apply, along with any applicable section 7 additional terms, 

to the whole of the work, and all its parts, regardless of how they are 

packaged. This License gives no permission to license the work in 

any other way, but it does not invalidate such permission if you have 

separately received it.
d) If the work has interactive user interfaces, each must display 

Appropriate Legal Notices; however, if the Program has interactive 

interfaces that do not display Appropriate Legal Notices, your work 

need not make them do so.

A compilation of a covered work with other separate and independent 

works, which are not by their nature extensions of the covered work, and 

which are not combined with it such as to form a larger program, in or on 

a volume of a storage or distribution medium, is called an “aggregate” if 

the compilation and its resulting copyright are not used to limit the 

access or legal rights of the compilation's users beyond what the 

individual works permit. Inclusion of a covered work in an aggregate 

does not cause this License to apply to the other parts of the aggregate.

Содержание XRN-410S

































































































Отзывы: