background image

English

 

_23

●  LIVE

MAINTAIN THE SCREEN RATIO

The screen ratio for a live video can be changed.

Maintain a screen ratio for all channels

Video screen ratio for all channels can be changed in live split screen mode.

1. 

Select <

Keep full scr ratio

> from the live screen menu.

The screen ratio for all channels will be changed.

2. 

If you want to go back to the previous screen ratio, check the menu option for <

Keep full scr ratio

>.

Maintain a channel screen ratio

If you select a channel from a live single screen or split screen, you can change its video screen ratio.

1. 

Select <

Keep ch. scr ratio

> from the live screen menu.

The screen ratio of a specified channel will be changed.

2. 

If you want to go back to a previous screen ratio, select <

Keep ch. scr ratio

> again.

DISPLAY TEXT

Change text output

The NVR can display text on a live screen when a text device is set. 

Select text output

This is executable when a text device is connected.

 

• How to turn the text output off : Select "

OFF

" from the text list.

 

• How to display on other devices differently from the preset device : Select a device to display from the text list.

PTZ CONTROL

With this NVR, you can configure the settings of a PTZ camera as well as commercial cameras in the market to your 
preference.

PTZ device

This is active only if a channel that a PTZ camera is connected to is selected.

Getting started with PTZ operations

The PTZ camera will be activated only if the channel of the PTZ camera is selected, which can be performed in 
the following way:

 

• Using the launcher menu : Click < 

 > from the launcher menu of the Live screen.

 

• Using the Live screen menu : Select <

PTZ Control

> in the context menu of the Live screen.

 

• Using the icons on the Live screen : Simply click the <

> icon on the Live screen.

 

M

 

`

This is available only if a PTZ camera is connected and the 

<

>

 icon is displayed on the screen.

 

`

Even if the connected network camera does not support the PTZ operations, you can configure the PTZ control settings 
(if possible) by installing the PTZ driver (physical device).

 

`

It only supports a network camera with Hanwha Techwin's PTZ function and a camera registered in the ONVIF.

Onions                             3.59

Onions                             3.59

CHIP                                 2.37

CHIP                                 2.37

Apple                               2.69

Apple                               2.69

Goat                                 0.79

Goat                                 0.79

Cheese                             0.69

Cheese                             0.69

Onions                             1.58

Onions                             1.58

Peppers red, loose 0.59

Peppers red, loose 0.59

        2 x 0.79                 1.18

        2 x 0.79                 1.18

Pasta                           0.59

Pasta                           0.59

        2 x 0.59                 1.18 

        2 x 0.59                 1.18 

========================

========================

TOTAL                           3.63 

TOTAL                           3.63 

                    TEXT 01

                    TEXT 01

Onions                             3.59

Onions                             3.59

CHIP                                 2.37

CHIP                                 2.37

Apple                               2.69

Apple                               2.69

Goat                                 0.79

Goat                                 0.79

Cheese                             0.69

Cheese                             0.69

Onions                             1.58

Onions                             1.58

Peppers red, loose 0.59

Peppers red, loose 0.59

        2 x 0.79                 1.18

        2 x 0.79                 1.18

OK

TEXT 01

Cheese                             0.69

Cheese                             0.69
Onions                             1.58

Onions                             1.58
Peppers red, loose 0.59 

Peppers red, loose 0.59 
        2 x 0.79                 1.18 

        

        2 x 0.79                 1.18 

        

TEXT 01

TEXT 01

Cheese                             0.69

Cheese                             0.69
Onions                             1.58

Onions                             1.58
Peppers red, loose 0.59 

Peppers red, loose 0.59 
        2 x 0.79                 1.18 

        

        2 x 0.79                 1.18 

        

TEXT 01

TEXT 01

Cheese                             0.69

Cheese                             0.69
Onions                             1.58

Onions                             1.58
Peppers red, loose 0.59 

Peppers red, loose 0.59 
        2 x 0.79                 1.18 

        

        2 x 0.79                 1.18 

        

TEXT 01

TEXT 01

Cheese                             0.69

Cheese                             0.69
Onions                             1.58

Onions                             1.58
Peppers red, loose 0.59 

Peppers red, loose 0.59 
        2 x 0.79                 1.18 

        

        2 x 0.79                 1.18 

        

TEXT 01

TEXT 01

Cheese                             0.69

Cheese                             0.69
Onions                             1.58

Onions                             1.58
Peppers red, loose 0.59 

Peppers red, loose 0.59 
        2 x 0.79                 1.18 

        

        2 x 0.79                 1.18 

        

TEXT 01

TEXT 01

OFF

OFF

OFF

OFF

OFF

OFF

Scene Mode 

Layout ►

Keep ch. scr ratio

Status ►

PTZ Control

ZOOM

Audio ►

Freeze

Stop Alarm

Capture

Record

Play

Search

Backup

Menu

Quick Setup 

Shutdown

Logout

Hide Launcher

Scene Mode 

Layout ►

Keep full scr ratio

Status ►

Audio Off

Freeze

Stop Alarm

Record

Play

Search

Backup

Menu

Quick Setup 

Shutdown

Logout

Hide Launcher

Содержание XRN-410S

































































































Отзывы: