Problem Action
In the recording setting screen, the permitted level
for a specific channel is displayed in orange.
y
If the input data is greater than the permitted level for each channel, it is
displayed in orange. Set the permitted data limit to higher than the amount of
input data.
y
If the sum of input data for each channel exceeds the limit, the alarm icon will
be displayed. In this case, the channel exceeding the input limit does not
record the entire frame, but it records the main frame only(one or two per
sec).
In the live screen, the [
] icon is displayed and
the message window saying " recording data load
exceeds the limit. Check it in the record setting."
pops up.
y
If the sum of input data for each channel exceeds the limit, the alarm icon
and the pop up window will be displayed. In this case, the channel exceeding
the input limit does not record the entire frame, but it records the main frame
only(one or two per sec).
y
Set the permitted data limit to higher than the amount of input data entered
in the record setting menu (page 41).
Recording is not performed in accordance with the
settings.
y
If the recording status displays ‘Exceeds the maximum hard disc
performance’, set the recording size according to the recording performance
specifications.
(Refer to "
Record Settings
" in the menu settings. (Page 41))
The recording screen will slow down.
y
Check whether the recording performance specifications match the actual
recording settings.
(Refer to "
Record Settings
" in the menu settings. (Page 41))
y
If the data volume of a video exceeds the playing performance, only the main
frame is played.
(Refer to "
Product Specifications
" in the appendix. (Page 77))
If recording loss persists continuously
y
Reset the camera recording profile to let the entire recording bps size fit
the recording performance. (Refer to “
Record Settings
” in the menu
settings. (Page 41))
`
Check the HDD status and determine whether inspection or replacement
is necessary.
(Refer to “
Storage Device
” in the menu settings. (Page 37))
When plugin does not get installed when trying to
connect to the camera web page from camera
settings in the web viewer
y
Try again after setting the compatibility view from the web page of the
NVR web viewer.
84_
appendix
appendix
