16
2.
For the installer
2.3.6 Converting the door catch from left to right
The filling. lighting and ash doors can be converted so that the catch is on the right side. If this is not necessary. move
on to Section 2.3.7.
Filling door:
– Remove the filling door – knock the hinge pins out and take the filling door off.
– Unscrew the door mounting and lock mounting from the boiler body and screw them back on the other way round –
Fig. 12.
– In the case of a filling door. undo the 4 screws on the door leaf and remove it entirely (Fig. 13). turn it 180° and screw
it back on using fastening screws.
– Install the filling doors.
– Install the door handle in the correct position using a collar screw and hook catch bolt – Fig. 15.
Note!
To ensure the collar screw doesn't come loose during operation. it should be fixed with a liquid screw ad-
hesive – Fig. 14.
– Set the filling doors – see Section 2.3.6.1.
Fig. 12 switching round the door mounting and
lock mounting
Fig. 13 Removing the entire door leaf. rotating
it 180° and screwing it back on
Lock mounting
Door mounting
Door leaf
Fig. 14 Applying liquid screw adhesive to
the collar screw
Fig. 15 Installing the door handle using a
collar screw and hook catch bolt
Hook catch bolt
Collar screw
Door handle
