28
2.
For the installer
2.3.16 Installing insulation for the rear panel
– Install insulation on the top and bottom as shown in Fig. 56.
Fig. 56 Installing insulation on the rear panel
Fig. 57 If no adapter for the fl ue connection
is being used. break off the cut-out
2.3.17 Installing the rear panels
– If no adapter for the fl ue gas blower (accessories) is being used. break off the cut-out at the top of the back panel – Fig. 57.
Large cut-out = exhaust pipe insulated
Small cut-out = exhaust pipe not insulated
Do not break off = adapter for flue connection installed
– Fasten the rear panel at the top and bottom with 4 screws on each side – Fig. 58.
– Connect the blower plug to the flue gas blower and secure cable at the side with cable ties – Fig. 58.
Fig. 58 Installing the rear panels
4 each of
4 each of
Blower plugs