23
2.
For the installer
Fig. 41 If no adapter for the flue connection is
being used. break off the cut-out
– Upper insulating plate:
If
no
adapter for the flue gas blower (accessories) is being used. break off the cut-out at the top of the back panel –
Fig. 41.
Large cut-out = exhaust pipe insulated
Small cut-out = exhaust pipe not insulated
Do not break off = adapter for flue connection installed
Position the upper insulating plate (Fig. 42). bend it (Fig. 43) and attach it with 6 self-tapping screws and one saw
tooth ring for the earth – Fig. 44.
Fig. 42 Positioning the upper insulating plate
Fig. 43 Bending the upper insulating plate
Fig. 44 Attaching the upper insulating plate
1 x
1 x
1 x
1 x
1 x
1 x