Wincor Nixdorf TH210, Руководство программиста

Страница: 89 / 152

TH210 Programmer’s Guide
85
m Bar code d1...dk length
supplied by printer if
necessary)
70 Interleaved 2 of 5
(ITF)
48–57 Variable length (even number)
71 CODABAR (NW-7) 65–68, start code 48- 57,
36, 43, 45, 46, 47, 58 Variable length
72 Code 93 00–127 Variable length
73 Code 128 0–105 d1 = 103-105
(must be a start code) d2
= 0–102 (data bytes)
(Stop code is provided by
the printer) Variable length
74 Code 128 auto
compress
00–255
00–FF Variable length
75 PDF 417 00–255
00–FF Variable length
78 Code EAN 128 auto
compress
00–255
00–FF Variable length
79 00–255
00–FF
data length specified via
integer
n = n H: n L 1D 6B
m n L n H d1 . . . dn
Variable length
0 <
n < 2800
The value of m selects the bar code system as described in the table.
The variable d indicates the character code to be encoded into the specified bar code system. If
character code d cannot be encoded, the printer prints the bar code data processed so far, and the
following data is treated as normal data.
Exceptions
Code 93 and PDF 417 are only available in Native mode
Print multiple barcodes
ASCII
Hexadecimal
Decimal GS k
1D 6B FF n
29 108 255
All the individual barcode strings start with 1D 6B m, where m is the type of barcode. Use the same
command to do multiple barcodes on one line.
1D 6B FF 01 begin multiple barcodes one line
1D 6B FF 00 end multiple barcodes one line, print the barcodes
Multiple barcodes can be aligned right, left, center same as single line barcodes
All barcodes on one line printed at same alignment, height, width, and HRI as the first one
Parameters for alignment, height, width, and HRI can be set before or after 1D 6B FF 01 command