Wincor Nixdorf TH210, Руководство программиста

Страница: 11 / 152

TH210 Programmer’s Guide
7
Configuring the printer
The configuration menu allows you to select functions or change various settings for the printer.
Instructions printed on the receipt guide you through the processes.
Caution: Be extremely careful changing any of the printer settings to avoid changing other settings
that might affect the performance of the printer.
1. Turn power off to printer.
2. Make sure receipt paper is loaded in the rpinter before proceeding. Make sure cover is
closed.
3. Apply power to printer and immediately press and hold the paper feed button until the
configuration printout begins.

The printer beeps, then prints Diagnostics Form I.

Press the paper feed button within two seconds to enter the configuration main menu

The printer prints Diagnostics Form II, followed by the Printer Configuration Menu, and
waits for a main menu selection to be made (see sample printout on page 13; short
clicks are used, except when answering “yes” or validating selection).
4. To communicate with the printer, you will press the paper feed button using either
short or long clicks. Use a long click for “yes” (more than one second) and a short click
for “no.” Follow the printed instructions to make selections.
5. Continue through your menu selections until you are asked, “Save New Parameters?”
Select “Yes.”

Reset the Printer.

Open the receipt cover.

Press and hold the paper feed button while closing the receipt cover.
The diagnostic printout verifies your new settings.