Wincor Nixdorf TH210, Руководство программиста

Страница: 21 / 152

TH210 Programmer’s Guide
17
Programming Commands
Commands listed by function
Printer actions
Code (hexadecimal)
Command
10 Clear printer
19 Perform full knife cut (or code 1B 69)
1A Perform partial knife cut (or code 1B 6D)
1B 07 Generate tone
1B 3D n Select peripheral device (for multi-drop)
1B 40 Initialize printer
1B 63 34 n Select sensors to stop printing
1B 63 35 n Enable or disable panel button
1B 69 Perform full knife cut (or code 19)
1B 6D Perform partial knife cut (or code 1A)
1B 70 n p 1 p 2 Generate pulse to open cash drawer
1F 03 3C ll hh Set timeout value for low-power idle state
1F 70 Set printer into low-power idle state
1D 56 m Select cut mode and cut paper (or code 1D 56 m n )
1D 56 m n Select cut mode and cut paper (or code 1D 56 m )
1F 03 4E n1 n2 Port Idle Timeout
1F 74 Print test form
Print and paper feed
Code (hexadecimal)
Command
0A Print and feed paper one line
0D Print and carriage return
14n Feed n print lines
15 n Feed n dot rows
16 n Add n extra dot rows
17 Print
1B 4A n Print and feed paper
1B 64 n Print and feed n lines