5
Overview
INSTALLING THE FOB BATTERY
The fob uses a commercially available CR2032 coin cell battery.
The battery that is shipped with the system must be installed prior
to using the fob.
The battery will normally have to be replaced every 3 months
depending upon how much the fob is used.
The fob case can be pried open using a small flat blade screw-
driver, then snapped back together starting at the battery end
and working back toward the opposite end.
The fob battery could cause serious injury or death
including choking. Keep coin cell type batteries away
from children.
After the battery is replaced, the system does a quick
check by illuminating all the LED indicators. If all of the
LEDs do not illuminate, then either the battery or the
LEDs are not working, or the battery has been installed
upside-down.