WillowWood LimbLogic Series Скачать руководство пользователя страница 23

23

The fob and the Charger are not water resistant

. Submersion of 

the fob or the Charger will void the warranty.

SERVICE LIFE 

The LimbLogic pumps are designed for a reliable service life of at 
least two years.

WARRANTY

The warranty for the LimbLogic is two years from invoice date, 
provided that the system is selected according to the following 
criteria:

Note: The weights listed below are adjusted body weights. 
Adjusted body weight is defined as the weight of the amputee 
plus any loads normally or routinely carried by the amputee.

Level 1    

Level 2    

Level 3    

Level 4

350 lbs    

350 lbs    

350 lbs    

300 lbs

160 kg    

160 kg    

160 kg    

135 kg

Level 4: Has the ability or potential for prosthetic ambulation 
that exceeds basic ambulation skills, exhibiting high impact, 
stress, or energy levels. Typical of the prosthetic demands of 
the child, active adult, or athlete.

Use of LimbLogic for amputees who do not meet the above  
criteria or who engage in extremely high and abusive activities  
is against WillowWood’s recommendations and will void the  
two-year warranty. “Extremely high and abusive activities” are 
defined as activities such as skydiving, karate, and judo; activities  
that could result in injury to an individual’s natural limbs; and 
activities that expose the prosthesis to corrosives such as salt 
water.

WARRANTY DISCLAIMER

WillowWood warrants that each product manufactured will, at 
the time of delivery, be of workmanlike quality and substantially 
free of defects. WILLOWWOOD MAKES NO OTHER WARRANTY, 
IMPLIED, OR EXPRESSED, AND MAKES NO WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
This warranty shall terminate immediately upon an action to 
combine our products with other materials or in any manner to  
change the nature of our products. The sole remedy is replacement  
of the products or credit for the products. WillowWood’s liability 
shall not exceed the purchase price of the product. WillowWood 
shall not be liable for any indirect, incidental, or consequential 
damage.

WILLOW WOOD RETENTION OF RIGHTS

WillowWood retains all intellectual property rights reflected or 
incorporated in its physical products, regardless of the transfer 
of the physical products to another party or parties.

There are no field-serviceable parts inside the Vacuum Pump. 
Opening the Vacuum Pump will void the warranty.

Technical Information

Содержание LimbLogic Series

































Отзывы: