13
Up
Bilateral
Indicators
Down
Leak
Indicator
Enter
If the pump detects a leak, the red
Leak Indicator
will illuminate,
the usage mode will change to
Standby State
, and the pump will
beep 10 times rapidly. The pump will repeat this every 30 seconds
for 6 minutes unless acknowledged by pressing the
on/off button
on the pump.
To return to
Active State
,
press and hold the
Enter
button.
BILATERAL INDICATORS
If a fob is configured to support bilateral Vacuum Pumps, one of
the two white indicators at the top of the fob will illuminate to
show which pump (left or right) is being controlled.
To switch the fob from controlling one pump to the other, press
and hold the
Up
and
Down
buttons together for approximately
1 second. The “chasing” pattern will be displayed, and the indicator
light will switch from one side to the other while communication
with the other pump is being established.
If communication is established, the displays and controls are
similar to those for a unilateral system.
If no communication can be established, the fob will return to
controlling the pump that it controlled prior to the attempted
switch.
Overview