25
LimbLogic Fob
This product contains a user replaceable lithium battery.
Replace only with user replaceable CR2032 batteries.
Discard of discharged batteries in accordance with local
regulations. Observe polarity markings on the battery
and the fob housing when replacing the battery.
This product complies with: EN 60601-1-2:2007, IEC
60601-1-11:2010, IEC 60601-1-6:2010, IEC 60601-1-2 ED.
3.0, and IEC 60601-1:2005 +CORR.1(2006) + CORR. 2
(2007).
IEC 60601-1 Classifications:
Internally powered
Degree of protection against electrical shock –
Type BF Applied Part
In addition to the above compliances, this device com-
plies with EN55022:1998/A1:2000/A2:2003 Class B ITE
emissions requirements and all requirements for Low
Interference Potential Devices (LIPD) and compliance
with the requirements for a General User Licence (GUL).
LimbLogic Vacuum Pump
This product contains a rechargeable Lithium Ion
Battery. Use ONLY a Willow Wood Charger. Use of other
chargers may result in harm to the device, the user, or
both and void the warranty.
Blocking or plugging the exhaust port of the vacuum control
assembly will prevent proper operation of the vacuum pump.
The LimbLogic Vacuum Pump is intended for use on a
single patient. Use of the system with multiple patients
could lead to cross contamination between patients.
The LimbLogic vacuum system has been designed
for and clinically tested as a suspension aid. It has not
been clinically tested for wound healing or other uses.
WillowWood does not currently support the use of the
LimbLogic for uses other than suspension.
Use only the bolts supplied by WillowWood. All testing
for the LimbLogic vacuum system has been tested with
the bolts included with the system. Use of other bolts
could result in mechanical failure.
LimbLogic has been constructed using polymer
materials to create a durable, lightweight, watertight,
and radio-transparent design. These materials have all
been certified to an inflammability rating of at least HB
per UL 94. However, polymers can melt or burn if
exposed to high temperatures or flame. Do not
expose your LimbLogic product to these conditions
This product complies with: EN 60601-1-2:2007, IEC
60601-1-11:2010, IEC 60601-1-6:2010, IEC 60601-1-2 ED. 3.0,
IEC 60601-1:2005 +CORR.1(2006) + CORR. 2 (2007), CEI/
IEC 60529:1989+A1:1999 rating IP28, and ISO 10328:2005.
IEC 60601-1 Classifications:
Internally powered/Powered from Class II Power Supply
Degree of protection against electrical shock –
Type BF Applied Part
This product complies with the requirements of ISO 10328.
In addition to the above compliances, this device complies
with EN55022:1998/A1:2000/A2:2003 Class B ITE emissions
requirements and all requirements for Low Interference
Potential Devices (LIPD) and compliance with the require-
ments for a General User Licence (GUL).
Technical Information