Net
User Manual 7.1 (2019-04) 24
Subject to change
WiNet-SW-01 Wildeboer-Net software
The Wildeboer-Net software is used for visualisation of the operating and diagnostics data collected in the field and
to control connected modules and their parametrisation, for example, for function tests, sequence controls, release
group controls and calendar controls.
The scope of delivery of the central operating unit
(
⇒
see page 25)
includes the software, which is pre-installed.
Optionally, the software can be installed on the user's PC which is connected to the subnet controller via Ethernet.
System requirements:
•
Windows 7, Windows 8 or Windows 10 (32 bit or 64 bit)
•
Microsoft .Net Framework 4.0
•
2 GB RAM
•
100 MB free hard drive space
•
USB interface (min. USB 2.0, Enhanced Host Controller Interface)
•
Ethernet interface (100 Mbit/s)
No permanent connection between the subnet controller and the Wildeboer-Net software on the user's PC or the
central operating unit is required to operate the system.
WiNet-OPC-01 OPC-UA server software
The OPC-UA server software facilitates the integration of Wildeboer-Net into SCADA applications. SCADA (supervisory
control and data acquisition) denotes a computer system in which technical processes are monitored and controlled.
The WiNet-OPC-01 OPC-UA software is used to query status data from the field modules of Wildeboer-Net. In addi-
tion, this can be used to operate field modules, i.e. fire dampers can be opened and closed. Functional tests can be
started and faults and alarms can be reset.
An OPC UA client is required for visualisation and operation.
The user must provide an OPC gateway for connecting SCADA systems which are not based on the OPC UA standard,
but on Classic OPC. It is included on the OPC-UA server software data medium. The required licence for using the
OPC UA gateway must be purchased from Unified Automation, www.unified-automation.com. Hardware information,
such as MAC address, is exchanged for this purpose.
SCADA system
with
OPC UA client
OPC UA server
OPC UA server
OPC UA gateway
SCADA system
with
Classic OPC client
Wildeboer-Net
Products (9)
Supported operating systems:
•
Microsoft® WindowsTM 7
•
Microsoft® WindowsTM 10
Supported OPC UA specification:
•
up to Part 8 – Data Access
