Net
BS2-IO-01
CO2 switch
(VOC)
Window
contact
Presence
detector
m³/h
SETPOINT
ACT
t
1
0-
OI
-
2
S
B
1
0-
R
V-
2
S
B
VRE1 volume flow controller
BS2-VR-01
Presence
ON
CO
2
ON
Window
OPEN
CO
2
OFF
Window
CLOSED
Presence
OFF
User Manual 7.1 (2019-04) 13
Subject to change
Wildeboer-Net
Functions (6)
Sequence control
⇒
see page 2 (EnEV)
The Wildeboer-Net software is used to implement the most frequent control application cases using assistants. An
example of this is the fan enabling function
(
⇒
see page 9).
The results of these assistants are automatically generated
sequence controls. The sequence control editor can be used to read out and display the generated sequence controls.
Sequence controls can be created separately for each field module. The status data from the respective field module
and the status data from all other field modules under the same subnet controller can be used as input signals. Flags
and the physical outputs of the respective field module are available as outputs. Note that the assistants overwrite
manually created sequential circuits in advance. The fan enabling thus always has to be created before the sequential
circuits which have to be created manually.
This way, it is possible to comply with the requirements of the EnEV (German Energy Saving Ordinance) for equipment
for automatic control of volume flow rates in accordance with thermal and material loads.
