Net
User Manual 7.1 (2019-04) 6
Subject to change
Wildeboer-Net
Product overview
Management level
WiNet-SW-01 Wildeboer-Net software
for installation on the user's PC. Included and pre-in-
stalled in the scope of delivery of the central operating unit.
⇒
see page 24
WiNet-ZB-01 central operating unit
with pre-installed operating system and Wildeboer-Net
software, ready for immediate use.
⇒
see page 25
WiNet-GW gateway
for connection to existing on-site building control system with different
communication protocols.
Six gateway types are available, each with a different communication protocol and a different
number of data points.
⇒
see pages 22, 23
WiNet-OPC-01 OPC-UA server software
for integrating Wildeboer-Net into SCADA applica-
tions.
⇒
see page 24
Automation level
BS2-SC-01 subnet controller
for initialising, controlling and monitoring up to four subnets,
and for data exchange with the higher management level via Ethernet.
⇒
see page 16
Field level
BS2-VR-01 volume flow and pressure controller module
for connection of up to four elec-
tronic volume flow and/or pressure controllers with RS485 or MP-Bus (manufacturer Wildeboer).
⇒
see page 17
BS2-MO motor module
for connection of up to two fire dampers and/or smoke protection
dampers with electrical spring return actuator.
Three versions of the motor module, with different connection technologies, are available.
⇒
see pages 18, 19
BS2-IO-01 I/O module
for connection of external sensors and actuators using eight galvanically
isolated inputs and eight galvanically isolated outputs.
⇒
see page 20
FACP module
for connection of on-site signalling units using four inputs for floating contacts
and two floating outputs. The module monitors the lines connected to the inputs for faults.
⇒
see page 21
FK90 fire damper for commercial kitchens with FKKUE-03 control unit
ready for connection
for Wildeboer-Net.
⇒
see page 16 and user manual 5.0-1
