widos RS 315, Перевод инструкций по эксплуатации

Страница: 21 / 41

Kunststoffschweißtechnik
WIDOS Einsteinstr. 5 Phone +49 (0) 71 52 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax +49 (0) 71 52 99 39 - 40
Website: www.widos.de Email: info@widos.de
21.10.14 Working instructions WIDOS RS 315 Page 21 of 38
5. Starting and operating
The instructions of this chapter are supposed to initiate in the operation of the machine and
lead during the appropriate starting of the machine.
This includes:

the safe operation of the machine;

using all the possible options of the machine;

the economic operation of the machine.
5.1. Starting
In order to start the operation, the band saw RS 315 has to be adjusted by means of the
screws in the machine feet in such a way that the pipe support and the saw blade guidance
are horizontal.
Connect the mains plug to the local power supply 400 V / 16 A / 50-60 Hz.
Connect the pressure regulator (optional) to the local compressed air supply (6-8 bars).
Remove the locking bolt on the right side from lug 1 (chapter 4.1).
It is necessary to install a vacuum; a connecting piece is available at the right
saw arm in the front (chapter 4.1).
In situations of danger for persons and the machine, the emergency-off has to
be pushed
immediately or the mains plug has to be unplugged! Cut only firmly
clamped pipes!
Replace the screw plug by the enclosed venting screw
before starting the band saw.
Do not throw away the screw plug; you need it again when
transporting the band saw.

Take care that no unauthorized person has access to the band saw.

Protect the band saw from wetness and humidity!
The saw arm has to be cleaned regularly – switch off the saw for that purpose! (see
point 6.4)
5.1.1. How to adjust the compressed-air regulator
Slowly pressurize the complete system.
Pull the pressure setting button left (away from the housing).
Turn the pressure setting until the desired pressure is shown on the
pressure gauge. The input pressure must be at least 1 bar greater
than the output pressure.
Press the pressure setting button to the right (towards the housing)
to secure it against unintentional turning.
Connection of compressed air hose for air supply 6-8 bar