Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
21.10.14 Working
instructions
WIDOS RS 315
Page 17 of 38
4.3. How to set the swiveling angle
In order to turn the saw arm, release both clamping levers and pull out the locking pins.
Now turn the saw arm onto the requested angle.
Lock the angle by the locking pins (right image).
Additionally tighten both clamping levers.
4.4. Linear
laser
(optional) and saw blade covering
At the upper saw blade guiding, there is the (optional)
linear laser. It indicates the cutting course on the
clamped pipe.
Adjust the light beam in a way that it is vertically
located above the saw blade.
Example: in case the saw is in position 90°, the light
beam also indicates 90° on the scale. Turn on/off the
laser via the sliding switch.
The laser is operated by a mignon battery.
In order to replace the battery, detach the upper
cover, change the battery and close the cover again.
Clamping lever
Pointer to read the angle
Disk with engraved scale
Drill holes for
angle setting
Locking pin
Sliding switch
Star screw
Saw blade covering
