Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
21.10.14 Working
instructions
WIDOS RS 315
Page 26 of 38
5.6. How to clamp and cut branch pipes
The prism features two slots in order to hook in the belt. Always clamp the pipes as close as
possible to the sawing cut.
Adjust the saw blade cover just shortly above the pipe (Chapter 4.4).
Put on the pipe and tightly clamp it by the belt (Chapter 4.6.1), thereby avoid deforming thin-
walled pipes.
Adjust the gap between center of rotation and saw blade to ½ OD of main pipe (as
described in chapter 5.5.1).
Activate the saw motor by pressing the push-button at the saw frame handle or by treading
the optional foot switch.
Carefully swivel the pipe against the running saw blade by the swivel arm handle and cut
the pipe through.
Release push-button or foot switch and wait for the saw blade to stand still.
Now you can unclamp and take out the pipe, and remove the reject.
