Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 (0) 71 52 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen
Fax
+49 (0) 71 52 99 39 - 40
Website:
www.widos.de
Email:
21.10.14 Working
instructions
WIDOS RS 315
Page 14 of 38
3. Functional description
B a s i c a l l y , t h e i n t e r n a t i o n a l a n d n a t i o n a l p r o c e s s g u i d e l i n e s a r e t o b e
f o l l o w e d .
Set the saw to the desired angle and secure it by clamping / fixing.
Lay the pipe on the pipe support and clamp it (check the distance to the saw blade!).
Switch on the optional line laser.
After having finished all settings, switch on vacuum and saw motor by button or foot switch
(optional).
At the same time, move the saw blade manually towards the pipe and cut the pipe.
After completion of the cutting process release the push button / foot switch (saw blade motor
switches off) and push the saw backwards.
Switch off the vacuum again.
Switch off the line laser.
Unclamp the pipe or push it into a new position and cut the second angle.
