Kunststoffschweißtechnik
Safety
rules
Chapter 2
21.10.14 Working
instructions
WIDOS RS 315
Page 11 of 38
2.7. Dangers
while
handling the machine
The band saw WIDOS
RS 315
is constructed according to the latest technical standard and
the acknowledged technical safety rules. However, dangers for the operator or other persons
standing nearby may occur. Also material damages are possible. The saw may only be
operated:
According to the purpose-oriented usage;
In safety technical impeccable status.
Disturbances which may affect the safety of the machine must be cleared immediately.
2.8. General safety indications
A working area without obstacles around the machine and a non-slip and plane floor are of
basic importance for a safe operation.
The working area must be well lightened and free of waste (cuttings, residues).
Before starting the operation, make sure that the saw blade is tightened properly and that
the band guidance is adjusted correctly, as well as that the door situated over the saw blade
guidance is closed.
During the operation, wear tight clothes only.
Keep the handles dry and free from oil and grease.
Wear safety glasses and ear protection during the cutting operation.
Do not wear rings, bracelets etc.
Protect long hair by means of a sufficient headgear.
During work, the pipe must be clamped firmly.
Never
remove oddments as long as the saw is working.
In case of irregular running behaviour of the saw blade, switch off the saw immediately and
check the saw blade for correct course, correct tension and possible fractures.
Replace dull or badly set saw blades by orderly installed saw blades.
Before elimination of any disturbances, and before any repair or maintenance work, switch
off the saw and disconnect
in any case
the mains plug.
Only skilled persons are allowed to work at electrical appliances.
The electrical equipment of the machine has to be checked regularly. Loose
connections and damaged cables have to be replaced or repaired
immediately.
Protect the machine from wetness and humidity.
System parts and pressure hoses should be depressurized before beginning
any repair work.
There is a danger of injuring the eyes by compressed air coming out suddenly.
Replace damaged pneumatic hoses immediately.
Make a visual inspection of the pneumatic hoses before each work beginning.
