Kunststoffschweißtechnik
Safety
rules
Chapter 2
21.10.14 Working
instructions
WIDOS RS 315
Page 12 of 38
2.9. Specific
dangers
2.9.1. Danger of cutting or catching clothes
You can cut yourself during sawing or exchanging the saw blade!
Before starting the cutting operation, take care that no person is standing in the
operating, swiveling or cutting area.
Always wear safety gloves and pull the power plug when exchanging the saw
blade.
Never remove cuttings or remains as long as the saw blade is running.
Before you start the cutting check the pipe is clamped
Attention! The saw still runs for appr. 3 sec after having released the push
button!
2.9.2. Danger of stumbling over pneumatic and electric wires
Make sure that no person has to step over the wires. Lay the wires in such a way
that the danger is kept to a minimum. Do not squeeze, buckle etc. the wires.
2.9.3. Danger of crushing upon mounting / dismounting the circular
cutting device
There may be an increased danger of crushing and jamming upon mounting or
dismounting the circular cutting device.
Please make sure that the device is secured by a belt against an unintentional
swiveling.
2.9.4. Danger
of
injury
by cutting chips / remains
You could injure your eyes by flying around chips
Do wear safety glasses during cutting!
2.9.5. Danger of injury by noise
Noise exceeding 80 dB (A) may occur; during sawing it is obligatory to wear ear
protection!
